Home           Products           Company           Contact us     
Theory of Machines and Properties of Materials
> Statics
> Dynamics
> Mechanical Demonstration Models
> Applied Physics
> Strength of Materials
> Stress and Strain Analysis
> Theory of Machines
> Material Testing
> Structural Mechanics
Mechatronics
Thermodynamics, Heating and Sanitary Systems
Fluid Mechanics and Hydrology
Process Control and Process Engineering
Overviews
Products  |  Theory of Machines and Properties of Materials  |  Theory of Machines  |  TM 260  |  TM 260.01
TM 260.01 Experimental Module Rolling / Sliding Disc Show data sheet (pdf file) Print page
Technical Description
The slip forces between two rotating friction discs in contact can be determined using this accessory module. The unit is intended for operation with the TM 260 Basic Module. Connection to the Basic Module is made using a clamped coupling. The slip between the discs is maintained at a constant 4% by a gearbox. The contact pressure can be adjusted in steps (10N) up to max. 80N. This adjustment is performed using a lever with a mechanical advantage of 2:1. A strain gauge force transducer connected to the controller measures the friction forces directly. The unit has a container for supplying lubricant. Knurled bolts enable the friction discs to be changed easily.
Learning Objectives / Experiments
· Friction forces as a function of the load
· Friction forces as a function of the lubrication
· Friction forces as a function of the operating speed
Features
Investigation of slip forces between two rotating discs in contact
Specification
[1] Supplementary experiment on slip forces between two rotating discs in contact
[2] Friction discs 53mm diameter, materials: aluminium/rubber
[3] Gearbox ration i: 0.96
[4] Strain gauge transducers for friction force 0..50N
[5] Weight set up to 40N
[6] l x w x h : 490x280x150mm
Technical Data
Friction discs: 53mm diameter,
materials: aluminium/rubber
Gearbox ratio i: 0.96
Strain gauge transducers for friction force: 0..50N
Weight set up to 40N
Dimensions and Weight
l x w x h : 490 x 280 x 150 mm
Weight : approx. 10 kg
Scope of Delivery
1 gearbox module, 1 force transducer module,
2 friction discs, 1 instruction manual
Order Details
040.26001 TM 260.01 Experimental Module Rolling / Sliding Disc
Print
© 2005 G.U.N.T. Gerätebau GmbH