Home           Products           Company           Contact us     
Theory of Machines and Properties of Materials
Mechatronics
Thermodynamics, Heating and Sanitary Systems
Fluid Mechanics and Hydrology
> Fundamentals of Fluid Mechanics
> Flow in Pipes
> Turbomachine Demonstrators
> Turbomachines
> Fundamentals of Aerodynamics and Airflow
> Hydrology and Hydraulic Engineering
> Components in Piping Systems
Process Control and Process Engineering
Overviews
Products  |  Fluid Mechanics and Hydrology  |  Fundamentals of Fluid Mechanics  |  HM 150  |  HM 150.13
HM 150.13 Methods of Flow Measurement Show data sheet (pdf file) Print page
Technical Description
The HM 150.13 Flow Meter Demonstration Apparatus contains different flow rate measurement devices that are clearly laid out with the associated pipework on a metal sheet. So that the function can be observed, the measuring devices are made of transparent plastic. The flow rate is measured using a nozzle, orifice, venturi flow meter and variable-area flow meter. To determine the flow rate using a nozzle/orifice and with the venturi flow meter, a differential pressure measuring device is required. This is included in the form of a multiple tube manometer so that the pressure curve along the venturi flow meter can also be displayed. The apparatus is placed on the HM 150 Basic Hydraulics Bench, this provides the water supply to the unit.
Learning Objectives / Experiments
· Comparison of different flow rate measuring devices
· Flow rate measurement with nozzle/orifice
· Flow rate measurement with venturi flow meter
· Throughput measurement with variable-area flow meter
· Determination of corresponding flow rate coefficients
· Familiarisation with differential pressure measurements
· Calibration of flow rate measuring devices
Features
Experimental set-up for the investigation of different methods of flow rate measurement
Alternative products
HM 150.11 -- Fluid Friction Apparatus
HM 150.40 -- Vortex Flowmeter
Specification
[1] Investigation of different methods of flow rate measurement, for use with HM 150 Basic Hydraulics Bench
[2] l x w x h 1100x640x870mm, 40kg
[3] Pipework made of plastic
[4] Variable-area flow meter 1600Ltr/h
[5] Differential pressure measurement on venturi flow meter, orifice and nozzle
Technical Data
6 tube manometer 300mmWC
Variable-area flow meter 1600Ltr/h
Min. diameter venturi flow meter 14mm
Nozzle diameter 18.5mm
Orifice diameter 14mm
Dimensions and Weight
l x w x h : 1100 x 640 x 870 mm
Weight : 40 kg
Scope of Delivery
1 experimental set-up, fully assembled,
1 instruction manual
Order Details
070.15013 HM 150.13 Methods of Flow Measurement
Print
© 2005 G.U.N.T. Gerätebau GmbH