G.U.N.T. - Equipment for engineering education -

Home

Products

Company

Theory of Machines and Properties of Materials

Mechatronics

Thermodynamics, Heating and Sanitary Systems

Fluid Mechanics and Hydrology

>	Fundamentals of Fluid Mechanics
>	Flow in Pipes
>	Turbomachine Demonstrators
>	Turbomachines
>	Fundamentals of Aerodynamics and Airflow
>	Hydrology and Hydraulic Engineering
>	Components in Piping Systems

Process Control and Process Engineering

Overviews

Products | Fluid Mechanics and Hydrology | Fundamentals of Fluid Mechanics | HM 150

HM 150

Basic Hydraulics Bench

Technical Description

The HM 150 allows to carry out a large number of flow-related experiments. To ensure a safe stand of the experimental set-ups, the work space is provided with a stepped edge. The first part of the work space is in form of a flow channel. Therefore, experiments with weirs are possible. The collecting tank is used to measure the flow rate. Two different measuring ranges are realised with a stepped tank.
The work space including the measuring tank and supply tank are made of reinforced fibreglass. Piping is made of PVC. The components are corrosion-free, shock-resistant difficult to deform.
The supply tank includes a pump. The bench is independent from a water supply because of the closed water circuit.

Learning Objectives / Experiments

The bench is used to supply water to the various experimental set-ups. The flow rates are set with a valve. Flow rates are measured indirectly: Reading of the filling level in the measuring tank while simultaneously measuring the time with a stop watch.

Features

Basic module for flow-related experiments
Closed water circuit
Complete, modular accessories program

Available accessories

HM 150.01 -- Pipe Friction Apparatus
HM 150.02 -- Dead-Weight Piston Gauge
HM 150.03 -- Flow Over Weirs Accessory
HM 150.04 -- Variable Speed Centrifugal Pump
HM 150.05 -- Hydrostatic Pressure Apparatus
HM 150.06 -- Stability of a Floating Body
HM 150.07 -- Bernoulli´s Principle Demonstrator
HM 150.08 -- Impact of Jet Apparatus
HM 150.09 -- Orifice and Jet Velocity Apparatus
HM 150.10 -- Flow Visualisation Apparatus
HM 150.11 -- Fluid Friction Apparatus
HM 150.12 -- Orifice Discharge Apparatus
HM 150.13 -- Methods of Flow Measurement
HM 150.14 -- Impeller Vortex Apparatus
HM 150.15 -- Hydraulic Ram Pump
HM 150.16 -- Twin Centrifugal Pump Configurations
HM 150.17 -- Learning Software for Basic Fluid Mechanics
HM 150.18 -- Osborne Reynolds Demonstrator
HM 150.19 -- Demonstration Pelton Turbine
HM 150.20 -- Demonstration Francis Turbine
HM 150.21 -- Flow Channel
HM 150.29 -- Losses in Bends and Fittings
HM 150.31 -- Rotating Tank Vortex Apparatus
HM 150.32 -- Pressure Distribution in a Venturi Nozzle
HM 150.33 -- Constant Head Inlet Tank
HM 150.34 -- Variable Head Outlet Tank
HM 150.35 -- Horizontal Osborne Reynolds Demonstrator
HM 150.36 -- Pitot-Static Tube Apparatus
HM 150.37 -- Rotameter
HM 150.39 -- Stability of a Floating Body - Additional Bodies
HM 150.40 -- Vortex Flowmeter
HM 150.78 -- Electrical Water Heater Module

Alternative products

HM 151 -- Basic Hydraulics Bench / Gravimetric

Specification

[1] Basic module for flow-related experiments using auxiliary modules
[2] Mobile construction with welded frame
[3] Closed water circuit with tank and pump
[4] Work space with integrated flow channel for experiments on weirs
[5] Work space fitted with stepped edge, 20mm, to ensure safe mounting of experimental modules
[6] Volumetric tank with 2 measuring ranges
[7] Volumetric and supply tank made of GRP
[8] 230V, 50/60Hz, 1 phase or 230V, 60Hz, 1ph.

Technical Data

Pump: 550W: max. flow rate: 230ltr/min, max. head: 11m
Supply tank: capacity: 180ltr
Volumetric tank
- for high flow rate: 40ltr
- for low flow rate: 10ltr

Flow channel lxwxh: approx. 530x150x180mm
Stop watch: measuring range: 0...9h59min59sec
Graduated beaker: 2ltr, graduation 50ml

Dimensions and Weight

l x w x h : 1220 x 760 x 1200 mm
Empty weight : approx. 125 kg

Connections

230V, 50/60Hz, 1 phase or 230V, 60Hz, 1 phase

Scope of Delivery

1 bench, completely assembled, 1 stopwatch, 1 graduated beaker, 1 instruction manual

Order Details

070.15000 HM 150 Basic Hydraulics Bench