Home           Products           Company           Contact us     
Theory of Machines and Properties of Materials
Mechatronics
Thermodynamics, Heating and Sanitary Systems
Fluid Mechanics and Hydrology
> Fundamentals of Fluid Mechanics
> Flow in Pipes
> Turbomachine Demonstrators
> Turbomachines
> Fundamentals of Aerodynamics and Airflow
> Hydrology and Hydraulic Engineering
> Components in Piping Systems
Process Control and Process Engineering
Overviews
Products  |  Fluid Mechanics and Hydrology  |  Fundamentals of Fluid Mechanics  |  HM 150  |  HM 150.78
HM 150.78 Electrical Water Heater Module Show data sheet (pdf file) Print page
Technical Description
Using the instantaneous water heater HM 150.78, the effect of temperature can be investigated in the experiments performed with the HM 150 series. The unit is placed on the HM 150 and supplied with water from the bench. The heater can be connected to almost every experimental module (HM 150.01 -HM 150.40) for which it is sensible to use heated water. The temperature of the heated water is limited to approx. 80°C for safety reasons.
Learning Objectives / Experiments
· Investigation of the effect of temperature
Features
Hot water generator for the HM 150 series
Specification
[1] Instantaneous heater for the HM 150 series
[2] Benchtop unit lxwxh 640x540x440mm, 15kg
[3] Heater 4.5kW, 3 stages
[4] Temperature limited to 80°C
[5] Capacity of tank 7.5ltr
[6] Switch box mounted on base plate
[7] 400V, 50Hz, phases
Technical Data
Heater: 4.5kW, 3 stages
Temperature monitoring via thermostat with PT100 temperature sensor
Temperature limited to 80°C
Thermometer: -10...100°C
Dimensions and Weight
l x w x h : 640 x 540 x 440 mm
Weight : approx. 15 kg
Scope of Delivery
1 instantaneous heater, 1 thermometer, 1 instruction manual
Order Details
070.15078 HL 150.78 Electrical Water Heater Module
Print
© 2005 G.U.N.T. Gerätebau GmbH