G.U.N.T. - Equipment for engineering education -

Home

Products

Company

Theory of Machines and Properties of Materials

>	Statics
>	Dynamics
>	Mechanical Demonstration Models
>	Applied Physics
>	Strength of Materials
>	Stress and Strain Analysis
>	Theory of Machines
>	Material Testing
>	Structural Mechanics

Mechatronics

Thermodynamics, Heating and Sanitary Systems

Fluid Mechanics and Hydrology

Process Control and Process Engineering

Overviews

Products | Theory of Machines and Properties of Materials | Material Testing | WP 410 | WP 410.20

WP 410.20

PC Data Acquisition System

Technical Description

This PC data acquisition software is an accessory for the pendulum impact tester WP 410. It facilitates the electronic measurement of the impact work during the notched bar impact bending test and evaluation of the results on a PC. Measured values and the notched bar impact work-temperature curve can be acquired, saved and printed out on a printer. In addition, a complete test log in accordance with DIN 50115 can be printed out. The instruction manual is integrated into the program as a PDF file. All common ISO specimens are supported, adaptation to user-specific specimen sizes is also possible. The measuring system consists of an angular sensor, a measuring amplifier with a serial interface and LC display for the impact work.

Learning Objectives / Experiments

- Support for the notched bar impact bending test in accordance with
DIN 50115
- Recording of the notched bar impact work-temperature curve

Features

* Data acquisition and evaluation program for the
notched bar impact bending test unit WP 410

Specification

[1] PC data acquisition software for the pendulum impact tester WP 410 for support to the notched bar impact bending test
[2] Acquisition, processing and saving of measured values and series of measurements of notched bar impact energies
[3] Support for all common ISO specimens
[4] Other specimen sizes can be integrated
[5] System requirements Windows NT or later

Technical Data

PC requirements:
Disk drive 3.5",
Graphics card: more than 256 colours
Interface: RS232
Operating system: WINDOWS NT or later

Dimensions and Weight

l x w x h : 265 x 260 x 110 mm
Weight : approx. 2 kg

Scope of Delivery

1 data acquisition software, 1 angular sensor, 1 amplifier, 1 set of cables, 1 installation manual

Order Details

020.41020 WP 410.20 PC Data Acquisition
System