|
|
| This apparatus is used to demonstrate belt drives, wheel and disk drives, and gear trains. Basic terminology and relationships, e.g. the transmission ratio, direction of rotation reversal, reference circle and modulus, the function of intermediate gears, and so on can be clearly demonstrated. A solid frame made of anodised aluminium section forms the base for the unit. The bearings for the pulleys and gears are attached to the T-slots in the profile using clamping levers. These are easy to release and can be slid horizontally making a wide range of different set-ups possible. All experiments are carried out using manual power. The size of the unit ensures that the experiment is clearly visible even for larger groups of students. |
 |
Learning Objectives / Experiments |
· Function and differences between belt drives, wheel and disc drives, and gear trains
· Explanation and demonstration of
- Transmission
- Reference circle
- Modulus
- Function of intermediate gears |
|
|
|
Features
|
|
|
| Sturdy table unit, ideally suited to demonstrations due to its size |
|
|
|
Alternative products
|
|
|
GL 105 -- Gear Trains Model
GL 410 -- Gear Assembly Unit: Simple Drives
GL 420 -- Gear Assembly Unit: Combined Drives
GL 430 -- Gear Assembly Unit: Step and Shift Gears
|
|
|
| Specification |
[1] Demonstration experiment on the how belt drives, wheel and disc drives and gear trains work
[2] Plastic belt pulleys and friction discs, diameters Ø300, Ø320, Ø400mm
[3] O-ring as drive belt 5x650mm
[4] Steel gears, modulus 20mm, z=15, 16, 20
[5] Base frame made of aluminium section, anodised
[6] l x w x h 1100x320x600mm |
| Technical Data |
Steel gears,
No. of teeth: 15, 16, 20, modulus: 20mm
Plastic belt pulleys,
Diameter: Ø300, Ø320, Ø400mm
Drive belt: O-ring 5x650mm |
| Dimensions and Weight |
l x w x h : 1100 x 320 x 600 mm
Weight : approx. 27 kg |
| Scope of Delivery |
| 1 gear trains apparatus, 1 instruction manual |
| Order Details |
030.10000 GL 100 Gear Trains Apparatus
|
|
