G.U.N.T. - Equipment for engineering education -

Home

Products

Company

Theory of Machines and Properties of Materials

>	Statics
>	Dynamics
>	Mechanical Demonstration Models
>	Applied Physics
>	Strength of Materials
>	Stress and Strain Analysis
>	Theory of Machines
>	Material Testing
>	Structural Mechanics

Mechatronics

Thermodynamics, Heating and Sanitary Systems

Fluid Mechanics and Hydrology

Process Control and Process Engineering

Overviews

Products | Theory of Machines and Properties of Materials | Dynamics | GL 105

GL 105

Gear Trains Model

Technical Description

This table-top unit conveys the relationship between the number of gear teeth on spur gears and the transmission ratio of gear trains. The unit consists of a metal base plate with a fixed axle and a rail made of steel. Two further axles can be clamped to the rail in any position. In this way it is is possible to construct one and two stage gear trains with any combination of gears. By undoing a locking pin, the rail can be swivelled around the fixed axis providing a demonstration of planet gear trains. Drive pins couple the gears. Four plastic gears are included with the unit. A plastic box is used to store the parts not in use.

Learning Objectives / Experiments

· Spur gear train with intermediate gear
· Two-stage spur gear train
· Planet gear train

Features

Impressive demonstration of the relationship between the number of gear teeth and the transmission ratio of gear trains

Alternative products

GL 100 -- Gear Trains Apparatus
GL 410 -- Gear Assembly Unit: Simple Drives
GL 420 -- Gear Assembly Unit: Combined Drives
GL 430 -- Gear Assembly Unit: Step and Shift Gears

Specification

[1] Table-top experiment on the relationship between the number of gear teeth and the transmission ratio of gear trains
[2] Spur gear trains 1 and 2 stage, planet gear trains
[3] Plastic gears, modulus 1,
Number of teeth 40, 60, 80, 100
[4] Base plate and carrier rail made of metal
[5] Plastic box for storing parts
[6] l x w x h 375x120x100mm

Technical Data

Plastic gears, modulus 1
Number of teeth: 40, 60, 80 and 100

Dimensions and Weight

l x w x h : 375 x 120 x 100 mm
Weight : approx. 3 kg

Scope of Delivery

1 complete gear trains model,
1 instruction manual

Order Details

030.10500 GL 105 Gear Trains Model