Home           Products           Company           Contact us     
Theory of Machines and Properties of Materials
> Statics
> Dynamics
> Mechanical Demonstration Models
> Applied Physics
> Strength of Materials
> Stress and Strain Analysis
> Theory of Machines
> Material Testing
> Structural Mechanics
Mechatronics
Thermodynamics, Heating and Sanitary Systems
Fluid Mechanics and Hydrology
Process Control and Process Engineering
Overviews
Products  |  Theory of Machines and Properties of Materials  |  Applied Physics  |  EM 053
EM 053 Eccentrically Loaded Tie Apparatus Show data sheet (pdf file) Print page
Technical Description
This table unit is used to observe the deformation of a bar under constant bending moment. The brass bending bar is positioned on two bearings that are fitted to a base plate. At the ends of the bending bar are struts using which the bending moment can be applied. The bending moments are generated using a set of weights and a cord. The resulting bar deformation is measured using a position measurement gauge mounted on a movable stand. It is possible to measure the deformation at any point between the bar bearings. The unit is suitable both for laboratory use for student experiment, and for demonstrations performed by the lecturer.
Learning Objectives / Experiments
· Loading of a bending bar with different constant moments
· Measurement of the deflection that occurs
Features
Table unit for the demonstration of the relationship between load and deformation on a bending bar
Alternative products
SE 110.45 -- Experimental Set Area Moment Method
SE 120 -- Structure Demonstration Model, Set of 7 Experiments
Specification
[1] Table unit for the demonstration of the relationship between load and deformation on a bending bar.
[2] Bent bar length 490mm
[3] Bar cross-section 10x10mm
[4] Bar material brass
[5] Weight set up to 20N
[6] Position measurement gauge 0...10mm, graduations 0.01mm
Technical Data
Brass bar, bent length: 490mm
Cross-section: 10x10mm
Modulus of elasticity: 95000N/mm˛
Dial gauge: 10mm, graduations 0.01mm
Set of weights: up to 20N
Dimensions and Weight
l x w x h : 740 x 250 x 300 mm
Weight : approx. 15 kg
Scope of Delivery
1 exp. app., complete, 1 bending bar, 1 dial gauge, 1 set of weights, 1 instruction manual
Order Details
049.05300 EM 052 Eccentrically Loaded Tie Apparatus
Print
© 2005 G.U.N.T. Gerätebau GmbH