Home           Products           Company           Contact us     
Theory of Machines and Properties of Materials
> Statics
> Dynamics
> Mechanical Demonstration Models
> Applied Physics
> Strength of Materials
> Stress and Strain Analysis
> Theory of Machines
> Material Testing
> Structural Mechanics
Mechatronics
Thermodynamics, Heating and Sanitary Systems
Fluid Mechanics and Hydrology
Process Control and Process Engineering
Overviews
Products  |  Theory of Machines and Properties of Materials  |  Structural Mechanics  |  SE 110  |  SE 110.34
SE 110.34 Loading Device with Force Gauge, 5000 N Show data sheet (pdf file) Print page
Technical Description
This loading mechanism is used if larger test forces up to 5kN are required. It is intended as an additional accessory for the SE 110 and SE 111 range of units and can be rapidly fitted to the relevant test frame using rapid action clamps. The force is generated using a threaded spindle and a hand wheel with a nut. The nut is free of play and mounted on a low-friction axial ball bearing. A ring dynamometer is fitted between the threaded spindle and the joint transmitting the force. Readings are taken directly on a calibrated dial gauge; the zero point of the gauge can be adjusted.
Learning Objectives / Experiments
· Generation of load forces for experiments in the SE-110 range
Features
Loading mechanism for larger test forces up to 5kN
Force generation using threaded spindle with hand wheel
Specification
[1] Supplement to the SE 110/SE 111 table-top system, generation of loads up to 5kN
[2] Threaded spindle with nut and hand wheel
[3] Nut in low-friction axial ball bearings
[4] Ring dynamometer with calibrated dial gauge
[5] Dial gauge zero point can be adjusted
[6] Assembly with rapid action clamps
[7] Connection threads for application of force M10
Technical Data
Max. test force: 5kN
Threaded spindle travel: 100mm
Connecting thread: M10
Dimensions and Weight
Weight : approx. 3 kg
Scope of Delivery
1 loading mechanism,
1 instruction manual
Order Details
022.11034 SE 110.34 Loading Device with Force Gauge, 5000 N
Print
© 2005 G.U.N.T. Gerätebau GmbH