Home           Products           Company           Contact us     
Theory of Machines and Properties of Materials
> Statics
> Dynamics
> Mechanical Demonstration Models
> Applied Physics
> Strength of Materials
> Stress and Strain Analysis
> Theory of Machines
> Material Testing
> Structural Mechanics
Mechatronics
Thermodynamics, Heating and Sanitary Systems
Fluid Mechanics and Hydrology
Process Control and Process Engineering
Overviews
Products  |  Theory of Machines and Properties of Materials  |  Structural Mechanics  |  SE 110
SE 110 Universal Structural Testing Frame, 5000N Show data sheet (pdf file) Print page
Technical Description
The testing frame is the basis for the SE 110 series of modular experiments for introduction to the topics of statics and the strength of materials.
The testing frame consists of anodised aluminium sections. These are firmly bolted to a very stiff double frame using solid steel plates. There are thus two frame shelves arranged one behind the other, these are separated by a space. The profile slots on all faces enable experimental set-ups to be securely and rapidly assembled. Sturdy stand made of steel angle. Suction feet attached to the stand prevent the free-standing frame from sliding. Alternatively, the frame can be bolted to a laboratory trolley.
Learning Objectives / Experiments
In conjunction with the experiments from the SE 110 range, numerous experiments can be performed on statics and the strength of materials.
Features
Base unit for numerous experiments on statics and material strength
Available accessories
SE 110.09 -- Experimental Set Deflection of Beams
SE 110.10 -- Experimental Set Shear Forces (Influence Lines)
SE 110.11 -- Experimental Set Bending Moment (Influence Lines)
SE 110.12 -- Experimental Set Influence Line
SE 110.13 -- Experimental Set Strut Buckling
SE 110.14 -- Experimental Set Continuous Beam
SE 110.15 -- Experimental Set Bending Moment and Shear Force
SE 110.16 -- Experimental Set Parabolic Arch
SE 110.17 -- Experimental Set Three Hinged Arch
SE 110.18 -- Experimental Set Suspension Bridge
SE 110.19 -- Experimental Set Stability of Structures
SE 110.20 -- Experimental Set Portal Frame
SE 110.21 -- Experimental Set Forces in a Truss
SE 110.22 -- Experimental Set Redundant Truss
SE 110.23 -- Experimental Set Shear Centre
SE 110.27 -- Experimental Set Unsymmetrical Bending
SE 110.28 -- Experimental Set Simple Suspension Bridge
SE 110.29 -- Experimental Set Torsion of Rods & Tubes
SE 110.30 -- Dial Gauge Set
SE 110.34 -- Loading Device with Force Gauge, 5000 N
SE 110.38 -- Experimental Set Welded Truss
SE 110.39 -- Experimental Set Wooden Truss
SE 110.44 -- Experimental Set Deflection of Trusses
SE 110.45 -- Experimental Set Area Moment Method
SE 110.47 -- Experimental Set Virtual Work
SE 110.48 -- Experimental Set Plastic Bending
SE 110.49 -- Experimental Set Deflection of Curved Bars
SE 110.50 -- Experimental Set Suspension Cable
SE 110.51 -- Experimental Set Equilibrium of Forces
SE 110.52 -- Experimental Set Equilibrium of Parallel Forces
SE 110.53 -- Experimental Set Equilibrium of a Rigid Body
SE 110.54 -- Experimental Set Equilibrium of a Beam
SE 110.55 -- Experimental Set Plastic Bending of Portals
SE 110.56 -- Experimental Set Modulus of Elasticity
SE 110.58 -- Experimental Set Free Vibration of a Bar
SE 110.61 -- Software Program L1 Structural Mechanics
SE 110.62 -- Software Program L2 Structural Mechanics
SE 110.63 -- Software Program L3 Structural Mechanics
SE 110.64 -- Software Program L4 Structural Mechanics
SE 110.65 -- Software Program L5 Structural Mechanics
SE 110.66 -- Software Program L6 Structural Mechanics
SE 110.75 -- Experimental Set Portal Frame with Overhanging Ends
SE 110.76 -- Experimental Set Portal Frame with Internal Brackets
SE 110.77 -- Experimental Set Unsymmetrical Portal Frame
SE 110.78 -- Experimental Set Square Frame, Closed
SE 110.79 -- Experimental Set Square Frame, Open
Alternative products
SE 111 -- Universal Test Frame and Stand, Steel Tube Version
Specification
[1] Frame for mounting experimental set-ups on statics and material strength
[2] Aluminium profile double frame
[3] Horizontal shelf separation 40mm
[4] Single load up to 5kN
[5] Frame opening w x h 1250x900mm
[6] Profile slot width 10mm
[7] Non-slip suction feet on steel angle
Technical Data
Double frame, shelf separation 40mm
Frame opening w x h: 1250x900mm
Load rating: point force up to 5kN
Profile slot width: 10mm
Dimensions and Weight
l x w x h : 1410 x 400 x 1120 mm
Weight : approx. 60 kg
Scope of Delivery
1 aluminium profile frame
Order Details
022.11000 SE 110 Universal Structural Testing Frame, 5000N
Print
© 2005 G.U.N.T. Gerätebau GmbH