Home           Products           Company           Contact us     
Theory of Machines and Properties of Materials
> Statics
> Dynamics
> Mechanical Demonstration Models
> Applied Physics
> Strength of Materials
> Stress and Strain Analysis
> Theory of Machines
> Material Testing
> Structural Mechanics
Mechatronics
Thermodynamics, Heating and Sanitary Systems
Fluid Mechanics and Hydrology
Process Control and Process Engineering
Overviews
Products  |  Theory of Machines and Properties of Materials  |  Structural Mechanics  |  SE 110  |  SE 110.19
SE 110.19 Experimental Set Stability of Structures Show data sheet (pdf file) Print page
Technical Description
Using this set, simple stability problems are investigated. The set is intended for usage with the SE 110/SE 111 universal test frames. The core of the set is a two-part test piece with a central joint at which the buckling load can be determined under varying boundary conditions. The elastic low-friction joint is represented by a torsion spring fitted between the two parts of the test piece. Loading is performed continuously using a lever with a set of weights. An exact scale on the lever permits the load to be determined with precision. Varying clamping is possible by means a steel spiral spring of variable length on the lower bearing. A further set of weights with a cord is used to generate shear forces.
Learning Objectives / Experiments
· Determination of the buckling load at varying boundary conditions
- Elastic joint
- Elastic clamping
· Influence of additional shear forces
· Influence of predeformation
Features
Continuous adjustment of the load on the test piece
Varying amount of clamping by means of spiral spring
Alternative products
SE 110.13 -- Experimental Set Strut Buckling
WP 120 -- Buckling Tester
WP 121 -- Euler Strut Theory Demonstration Unit
Specification
[1] Supplementary experiment for the SE110/SE111 system, stability of structures
[2] Two part test piece, length 2x250mm with elastic central joint
[3] Range of compresssive force 25...120N, continuous adjustment using lever and set of weights
[4] Shear loading 0...20N
[5] Spiral spring made of steel 2x10x500mm
Technical Data
Buckling bar with central joint
Length: 2x250mm
Compressive force range: 25...120N
Shear loading: 0...20N
Spiral spring, steel: 2x10x500mm
Dimensions and Weight
Weight : approx. 16 kg
Scope of Delivery
1 experimental set, complete,
1 instruction manual
Order Details
022.11019 SE 110.19 Experimental Set Stability of Structures
Print
© 2005 G.U.N.T. Gerätebau GmbH