G.U.N.T. - Equipment for engineering education -

Home

Products

Company

Theory of Machines and Properties of Materials

>	Statics
>	Dynamics
>	Mechanical Demonstration Models
>	Applied Physics
>	Strength of Materials
>	Stress and Strain Analysis
>	Theory of Machines
>	Material Testing
>	Structural Mechanics

Mechatronics

Thermodynamics, Heating and Sanitary Systems

Fluid Mechanics and Hydrology

Process Control and Process Engineering

Overviews

Products | Theory of Machines and Properties of Materials | Structural Mechanics | SE 110 | SE 110.13

SE 110.13

Experimental Set Strut Buckling

Technical Description

This set is used in conjunction with the SE 110/SE 111 universal test frames to investigate the buckling behaviour of thin struts. The strut, mounted on knife-edge bearings and easily interchangeable, is loaded longitudinally with weights using a lever mechanism. A pressure pad, mounted on a low-friction spherical coupling transmits the load to the strut. The load can be continuously adjusted and precisely read on a high accuracy scale. The experiment permits the use of the bearing types "articulated-articulated", "clamped-articulated" and "elastically clamped-articulated". An additional device is used to generate shear forces. The set includes all the necessary parts.

Learning Objectives / Experiments

· Determination of the buckling load and checking of Euler's formula
· Influence of different bearing conditions
· Influence of elastic clamping

Features

Strut loading continuously adjustable
Variable clamping by means of additional spiral spring

Alternative products

SE 110.19 -- Experimental Set Stability of Structures
WP 120 -- Buckling Tester
WP 121 -- Euler Strut Theory Demonstration Unit

Specification

[1] Supplementary experiment for the table-top system SE 110/SE 111, strut buckling
[2] Continuous strut loading 60...500N
[3] Three different types of bearing for the strut
[4] Strut 550mm, cross-section 20x2mm
[5] Spiral spring 500mm, cross-section 10x2mm
[6] Dial gauge 0...20mm, resolution 1/100mm
[7] l x w x h 1410x500x1155mm

Technical Data

Strut: 550mm, cross-section 20x2mm
Spiral spring: 500mm, cross-section 10x2mm
Load range: 60...500N
Shear load: 0...20N
Dial gauge: 0...20mm, resolution 0.01mm

Dimensions and Weight

Weight : approx. 13 kg

Scope of Delivery

1 experimental set, complete,
1 instruction manual

Order Details

022.11013 SE 110.13 Experimental Set Strut Buckling