G.U.N.T. - Equipment for engineering education -

Home

Products

Company

Theory of Machines and Properties of Materials

>	Statics
>	Dynamics
>	Mechanical Demonstration Models
>	Applied Physics
>	Strength of Materials
>	Stress and Strain Analysis
>	Theory of Machines
>	Material Testing
>	Structural Mechanics

Mechatronics

Thermodynamics, Heating and Sanitary Systems

Fluid Mechanics and Hydrology

Process Control and Process Engineering

Overviews

Products | Theory of Machines and Properties of Materials | Structural Mechanics | SE 110 | SE 110.79

SE 110.79

Experimental Set Square Frame, Open

Technical Description

The subject of experiments using this experimental set is the elastic deformation of a loaded portal frame. It is a supplement to the SE 110 / SE 111 universal test frame. The experimental object is a square frame of welded rectangular metal section, open at the base. The frame can be loaded vertically or horizontally as required using sets of weights and 2 moving hooks. The resulting deformation is measured with a dial gauge. The bearings can be either fixed or free enabling the frame to be observed as statically defined or undefined system. The experimental set-up is quickly and securely assembled using special clamps. The optional available software SE 110.66 supports learning success.

Learning Objectives / Experiments

- Relationship between load and deformation
- Superposition principle of mechanics
- Application of the theory of elasticity to statically defined and undefined
systems, comparison of calculation and measured results
- Method of virtual work

Features

* Open portal frame
* Statically defined or undefined case can be
investigated

Available accessories

SE 110.66 -- Software Program L6 Structural Mechanics

Alternative products

SE 110.20 -- Experimental Set Portal Frame
SE 110.75 -- Experimental Set Portal Frame with Overhanging Ends
SE 110.76 -- Experimental Set Portal Frame with Internal Brackets
SE 110.77 -- Experimental Set Unsymmetrical Portal Frame
SE 110.78 -- Experimental Set Square Frame, Closed

Specification

[1] Supplementary experiment for SE 110/ SE 111 system, deformation of portals
[2] Open square steel frame
[3] Bearings statically defined or undefined
[4] Deformation measured by dial gauge
[5] Load applied using 2 weights sets and moving hooks

Technical Data

Portal frame material: Steel
Edge length: 600mm, cross-section 10x20mm
Dial gauge measuring range: 0...20mm, resolution
0.01mm
Weights set: 2x1N basic weight, 6x5N, 8x1N

Dimensions and Weight

Weight : approx. 16 kg

Scope of Delivery

1 complete experimental set, 2 weight sets, 1 dial gauge, 1 instruction manual

Order Details

022.11079 SE 110.79 Experimental Set Square
Frame, Open