Home           Products           Company           Contact us     
Theory of Machines and Properties of Materials
> Statics
> Dynamics
> Mechanical Demonstration Models
> Applied Physics
> Strength of Materials
> Stress and Strain Analysis
> Theory of Machines
> Material Testing
> Structural Mechanics
Mechatronics
Thermodynamics, Heating and Sanitary Systems
Fluid Mechanics and Hydrology
Process Control and Process Engineering
Overviews
Products  |  Theory of Machines and Properties of Materials  |  Structural Mechanics  |  SE 110  |  SE 110.39
SE 110.39 Experimental Set Wooden Truss Show data sheet (pdf file) Print page
Technical Description
This experimental set is intended for use with the SE 110/SE 111 universal testing frames. With this set it is possible to perform experiments on the deformation of wooden trusses. The truss girder is mounted on two bearings on the frame. The truss can be continuously loaded up to 5kN using the loading device. The deformation can be measured using several dial gauges. Two guide rails can be fitted to avoid the truss buckling. The individual parts of the experiment are quickly and securely fitted to the respective test frame using clamps. The SE 110.34 Loading Device is required to perform the experiment, this is not included.
Learning Objectives / Experiments
· Wooden truss under various loads
- Measurement of deformation
- Relationship between load and deformation
- Calculation of the member forces
- Comparison of calculated results and measurement
- Application of the theory of elasticity on statically defined and undefined systems
Features
Experimental investigation of the deformation of wooden trusses
Available accessories
SE 110.34 -- Loading Device with Force Gauge, 5000 N
Alternative products
SE 110.38 -- Experimental Set Welded Truss
SE 110.44 -- Experimental Set Deflection of Trusses
Specification
[1] Supplementary experiment for the SE 110/SE 111 universal test frames, deformation of wooden trusses
[2] Beam cross-section 25x25mm
[3] Span 1090mm
[4] Load up to max. 5kN
[5] Measuring range 20mm, graduations 0.01mm
Technical Data
Truss length: 1120mm
Span: 1090mm
Cross-section: 25x25mm
Member length: 385.4 and 272.5mm
Dial gauge: 20mm, graduations: 1/100mm
Dimensions and Weight
Weight : approx. 16 kg
Scope of Delivery
1 experimental set, complete
1 instruction manual
Order Details
022.11039 SE 110.39 Experimental Set Wooden Truss
Print
© 2005 G.U.N.T. Gerätebau GmbH