G.U.N.T. - Equipment for engineering education -

Home

Products

Company

Theory of Machines and Properties of Materials

>	Statics
>	Dynamics
>	Mechanical Demonstration Models
>	Applied Physics
>	Strength of Materials
>	Stress and Strain Analysis
>	Theory of Machines
>	Material Testing
>	Structural Mechanics

Mechatronics

Thermodynamics, Heating and Sanitary Systems

Fluid Mechanics and Hydrology

Process Control and Process Engineering

Overviews

Products | Theory of Machines and Properties of Materials | Structural Mechanics | SE 110 | SE 110.38

SE 110.38

Experimental Set Welded Truss

Technical Description

This experimental set is intended for use with the SE 110/SE 111 universal testing frames. Experimental investigation of the deformation of welded trusses is possible with this unit. The welded steel truss girder is mounted on two bearings on the frame. The girder can be continuously loaded up to 5kN using the loading device. The deformation can be measured using several dial gauges. Two guide rails can be fitted to avoid the truss buckling. The individual parts are rapidly and securely fitted to the respective test frame using clamps. The SE 110.34 Loading Device is required to perform the experiment, this is not included.

Learning Objectives / Experiments

· Welded truss under various loads
- Measurement of deformation
- Relationship between load and deformation
- Calculation of the member forces
- Application of the theory of elasticity on statically defined and undefined systems
- Comparison of calculated results and measurement

Features

Experimental investigation of the deformation of welded trusses

Available accessories

SE 110.34 -- Loading Device with Force Gauge, 5000 N

Alternative products

SE 110.39 -- Experimental Set Wooden Truss
SE 110.44 -- Experimental Set Deflection of Trusses

Specification

[1] Supplementary set for the SE 110/SE 111 universal testing frames, deformation of welded trusses
[2] Metal truss girder, steel, welded
[3] Beam cross-section 10x10x1mm
[4] Span 1090mm
[5] Load up to max. 5kN
[6] Dial gauge 20mm, graduations 0.01mm

Technical Data

Truss length: 1115mm
Span: 1090mm
Bar cross-section: 10x10x1mm
Length of members: 385.4 and 272.5mm
Dial gauge: 20mm, graduations: 1/100mm

Dimensions and Weight

Weight : approx. 15 kg

Scope of Delivery

1 experimental set, complete,
1 instruction manual

Order Details

022.11038 SE 110.38 Experimental Set Welded Truss