G.U.N.T. - Equipment for engineering education -

Home

Products

Company

Theory of Machines and Properties of Materials

>	Statics
>	Dynamics
>	Mechanical Demonstration Models
>	Applied Physics
>	Strength of Materials
>	Stress and Strain Analysis
>	Theory of Machines
>	Material Testing
>	Structural Mechanics

Mechatronics

Thermodynamics, Heating and Sanitary Systems

Fluid Mechanics and Hydrology

Process Control and Process Engineering

Overviews

Products | Theory of Machines and Properties of Materials | Structural Mechanics | SE 110 | SE 110.14

SE 110.14

Experimental Set Continuous Beam

Technical Description

The set is used in conjunction with the SE 110/SE 111 universal test frames. It offers a wide range of experiments on the deformation of beams for varying load, varying bearing conditions and static redundancy. Loading is performed using sets of weights. The set has a height-adjustable jointed bearing with integrated dynamometers up to 50N. A fixed bearing is equipped with a clamping plate for clamping the beam. The deformation of the beam is measured with position measurement gauges with a resolution of 0.01mm. The set contains all the parts necessary for the experiments. These are securely attached to the test frame using special clamps.

Learning Objectives / Experiments

· Elastic line under varying load
· Elastic line for various bearing conditions
· Demonstration of the Maxwell-Betti set
· Elastic line and reaction force for statically undefined systems

Features

Beams made of steel, brass and aluminium
Jointed bearing with integrated dynamometers

Alternative products

EM 100 -- Educational Apparatus Bending and Torsion
SE 110.09 -- Experimental Set Deflection of Beams
SE 110.45 -- Experimental Set Area Moment Method
SE 110.47 -- Experimental Set Virtual Work
SE 120 -- Structure Demonstration Model, Set of 7 Experiments
WP 100 -- Apparatus for Testing Torsion and Deflection
WP 950 -- Beam Apparatus

Specification

[1] Supplementary experiment for the SE110/SE111 system, continuous beam
[2] Beam material: steel, brass, aluminium
[3] Length 1000mm, cross-section 20x3,4,6mm
[4] Free bearing with dynamometers ±50N
[5] Fixed bearing with clamping plate
[6] Position measurement gauges 0...20mm, resolution 0.01mm
[7] Loading using sets of weights

Technical Data

Beam material: steel, brass, aluminium
Beam length: 1000mm
Cross-section: 20x3, 20x4, 20x6mm
Position measurement range: 0...20mm, resolution 0.01mm
Load measuring range: ±50N

Dimensions and Weight

Weight : approx. 25 kg

Scope of Delivery

1 experimental set, complete,
1 instruction manual

Order Details

022.11014 SE 110.14 Experimental Set Continuous Beam