G.U.N.T. - Equipment for engineering education -

Home

Products

Company

Theory of Machines and Properties of Materials

>	Statics
>	Dynamics
>	Mechanical Demonstration Models
>	Applied Physics
>	Strength of Materials
>	Stress and Strain Analysis
>	Theory of Machines
>	Material Testing
>	Structural Mechanics

Mechatronics

Thermodynamics, Heating and Sanitary Systems

Fluid Mechanics and Hydrology

Process Control and Process Engineering

Overviews

Products | Theory of Machines and Properties of Materials | Structural Mechanics | SE 110 | SE 110.47

SE 110.47

Experimental Set Virtual Work

Technical Description

Using this experimental set the deformation of a loaded bending bar by forces and moments is considered using the principle of virtual work. The set is intended for use with the SE 110 or SE 111 universal testing frames. The set contains a test bar that can be clamped at both ends. In this way statically defined or undefined cases can be investigated as required. Forces or moments can be applied at any position, this feature permits different load cases to be investigated. For the determination of forces and deformation mech. dial gauges are used. An additional bearing with a dynamometer is used for the direct measurement of forces on the bar.

Learning Objectives / Experiments

· Loading of the bar using a single force
· Loading of the bar with a torque
· Inclination measurement on the end of the bar
· Superposition of simultaneously applied forces and moments
· Verification of the complete bending equation using several dial gauges
· Determination of the elastic line for a statically undefined system

Features

Application of force and moment at any position
Statically defined & undefined systems can be investigated

Available accessories

SE 110.66 -- Software Program L6 Structural Mechanics

Alternative products

SE 110.45 -- Experimental Set Area Moment Method

Specification

[1] Supplementary set for the SE 110 table system, application of the principle of virtual work
[2] Investigation of the statically defined and undefined system
[3] Bar made of steel
[4] Length 1000mm, cross-section 20x4mm
[5] Pos. Meas. range 0..20mm, graduation 0.01mm
[6] Force measurement range 0...50N, graduat. 1N

Technical Data

Bar length: 1000mm
Bar cross-section: 20x4mm
Bar material: steel
Pos. Meas. range: 0...20mm, graduations 0.01mm
Load measuring range: 0...50N, graduations 1N

Dimensions and Weight

Weight : approx. 27 kg

Scope of Delivery

1 experimental set, complete, 1 instruction manual

Order Details

022.11047 SE 110.47 Experimental Set Virtual Work