G.U.N.T. - Equipment for engineering education -

Home

Products

Company

Theory of Machines and Properties of Materials

Mechatronics

Thermodynamics, Heating and Sanitary Systems

Fluid Mechanics and Hydrology

>	Fundamentals of Fluid Mechanics
>	Flow in Pipes
>	Turbomachine Demonstrators
>	Turbomachines
>	Fundamentals of Aerodynamics and Airflow
>	Hydrology and Hydraulic Engineering
>	Components in Piping Systems

Process Control and Process Engineering

Overviews

Products | Fluid Mechanics and Hydrology | Turbomachines | HM 365 | HM 365.20

HM 365.20

Oil Pump Supply Module

Technical Description

The HM 365.20 is part of an equipment series that facilitates the investigation of a wide range of engines and machines. Different oil pumps can be operated on the supply module and investigated in terms of their characteristic behaviour. The pumps are connected into the experimental set-up using hydraulic hoses with quick action couplings. The flow is adjusted on a pressure valve and recorded using an oval wheel meter. Other sensors measure the temperature, intake and delivery pressure. The corresponding sensor connections and digital displays are located on the measuring equipment block. All measured data can be transferred to a PC for further processing. The drive motor for operation of the pumps is located on the universal unit HM 365.

Learning Objectives / Experiments

In conjunction with the HM 365 Universal Drive and Brake Unit and a pump (screw oil pump HM 365.21, gear type oil pump HM 365.22, vane cell oil pump HM 365.23, cycloid gear oil pump HM 365.24), the following experiments are possible:
- Recording of pump curves
- Determination of the power consumption of the
pump
- Determination of the hydraulic power output of the
pump
- Determination of the pump efficiency
- Determination of the system characteristic curve
and the operating point of the pump

Features

* Part of modular equipment series for the
investigation of different engines and machines
* Basic module for the operation of various oil pumps
* Processing of the measured data on a PC

Available accessories

HM 365.21 -- Screw Oil Pump Module
HM 365.22 -- Gear Type Oil Pump Module
HM 365.23 -- Vane Cell Oil Pump Module
HM 365.24 -- Cycloide Gear Oil Pump Module

Alternative products

HM 365.10 -- Water Pump Supply Module
HM 365.32 -- Turbine Supply Module

Specification

[1] Basic module for operation of oil pumps
[2] Experimental set-up on mobile frame
[3] Hydraulic piping with adjustable pressure valve and oval wheel meter
[4] Pumps connected by hydraulic hoses with quick action couplings
[5] Aluminium oil tank, 27ltr
[6] Oil/air cooling system, power 2...3kW
[7] Measuring equipment block for connection of electronic sensors
[8] Digital display of measured values and transmission to PC data acquisition (included in HM 365)
[10] 230V, 50Hz, 1 phase, connected via HM 365

Technical Data

Measuring ranges:
Intake pressure measurement: -1...+1bar
Delivery pressure measurement: 0...120bar
Temperature measurement: -50...250°C
Flow measurement: 0.4...10ltr/min

Oil tank, usable volume: 27ltr
Oil: HLP-ISO 32

Dimensions and Weight

l x w x h : 1200 x 850 x 1300 mm
Weight : approx. 80 kg

Connections

230V, 50Hz, 1 phase connected via the HM 365

Scope of Delivery

1 basic module with measuring equipment block, 1 instruction manual
(HM 365.21 – HM 365.24 pump modules are not included)

Order Details

070.36520 HM 365.20 Oil Pump Supply Module