Home           Products           Company           Contact us     
Theory of Machines and Properties of Materials
Mechatronics
Thermodynamics, Heating and Sanitary Systems
Fluid Mechanics and Hydrology
> Fundamentals of Fluid Mechanics
> Flow in Pipes
> Turbomachine Demonstrators
> Turbomachines
> Fundamentals of Aerodynamics and Airflow
> Hydrology and Hydraulic Engineering
> Components in Piping Systems
Process Control and Process Engineering
Overviews
Products  |  Fluid Mechanics and Hydrology  |  Turbomachines  |  HM 365  |  HM 365.23
HM 365.23 Vane Cell Oil Pump Module Show data sheet (pdf file) Print page
Technical Description
Vane cell pumps can be operated with constant or adjustable displacement. They are suitable for medium operating pressures.
The pump is ready for installation and mounted on a base plate, which is slid into the HM 365.20 and fixed in place. It is connected into the circuit using hydraulic hoses and connected to the sensors on the supply module. The motor required for operation is located in the HM 365. The delivery pressure and capacity of the pump can be adjusted.
Learning Objectives / Experiments
In conjunction with the HM 365 and the HM 365.20, the following experiments are possible:
- Recording of pump curves
- Determination of the power consumption of the pump
- Determination of the hydraulic power output of the pump
- Determination of the pump efficiency
- Determination of the system characteristic and operating point of the
  pump
Features
* Investigation of the pump characteristic of a vane cell
  pump
Available accessories
HM 365 -- Universal Drive and Brake Unit
HM 365.20 -- Oil Pump Supply Module
Alternative products
HM 365.21 -- Screw Oil Pump Module
HM 365.22 -- Gear Type Oil Pump Module
HM 365.24 -- Cycloide Gear Oil Pump Module
Specification
[1] Vane cell pump for operation on the HM 365.20
[2] Pump complete with connections, mounted on base plate
[3] Max. capacity: 0...18000cm³/min
[4] Max. head: 100bar
[5] Max. speed: 1800rpm
[6] Pressure relief valve: 100bar
Technical Data
Capacity per revolution: 0...10cm³
Permissible suction pressure: -0.7...3bar
Speed: 900...1800rpm
Intake socket diameter: 1/2"
Delivery socket diameter: 3/8"
Dimensions and Weight
l x w x h : 450 x 300 x 420 mm
Weight : approx. 19 kg
Scope of Delivery
1 vane cell pump, complete with connections mounted on base plate
Order Details
070.36523  HM 365.23  Vane Cell Oil Pump 
                     Module
Print
© 2005 G.U.N.T. Gerätebau GmbH