G.U.N.T. - Equipment for engineering education -

Home

Products

Company

Theory of Machines and Properties of Materials

>	Statics
>	Dynamics
>	Mechanical Demonstration Models
>	Applied Physics
>	Strength of Materials
>	Stress and Strain Analysis
>	Theory of Machines
>	Material Testing
>	Structural Mechanics

Mechatronics

Thermodynamics, Heating and Sanitary Systems

Fluid Mechanics and Hydrology

Process Control and Process Engineering

Overviews

Products | Theory of Machines and Properties of Materials | Structural Mechanics | SE 080

SE 080

Test Frame for Pillars

Technical Description

This large test frame is primarily intended for load tests on design elements from civil engineering and steel construction. The possible application for the test frame are almost unlimited. With its aid, e.g., struts, pillars, joiners and comparable components can be subject to compression or tensile loading. The test frame was specially designed for large components to facilitate testing in 1:1 scale. The design of the frame facilitates the rapid, uncomplicated set up of numerous experiments. The frame consists of the base frame, a support frame and a load frame that are both made of generously sized steel section. The base frame is fixed to the floor using anchors with threaded fittings. The tensile and compression forces are applied to the test specimens via the powerful hydraulic cylinder using a hand operated hydraulic load press. Data acquisition software is available as an accessory.

Learning Objectives / Experiments

· Loading of design elements from civil engineering and steel construction using compression and tensile forces

Features

Test frame for loading design elements from civil engineering and steel construction under compression and tension
Specially designed for large components (scale 1:1)
Compression forces up to 280kN, tensile forces up to 139kN

Alternative products

SE 090 -- Static Structural Testing System
SE 100 -- Universal Testing Frame, 400 kN

Specification

[1] Large load frame for testing design elements for steel construction and civil engineering using tensile and compression forces
[2] Sturdy design made of steel section
[3] Attachment using floor anchors
[4] Free frame width 2284mm
[5] Test object height 0...2100mm
[6] Adjustment steps of the cross-members 200 mm
[7] Hydraulic cylinder, stroke 300mm
[8] Compression force max. 286kN, tensile force max. 139kN
[9] Two stage hand pump with automatic changeover, oil capacity: 7.5ltr
[10] Pumped volume 1st stage 100ml/stroke, pumped volume 2. stage 6.66ml/stroke

Technical Data

Free frame width: 2284mm
Test object height: 0...2100mm
Cross-member adjustment steps: 200 mm
Hydraulic cylinder, stroke: 300mm
Compression force: max. 286kN,
Tensile force: max. 139kN
Two stage hand pump with automatic changeover, oil capacity: 7.5ltr
Pumped volume 1st stage: 100ml/stroke,
Pumped volume 2nd stage: 6.66ml/stroke
Length of high pressure hoses: 8000mm

Dimensions and Weight

l x w x h : approx. 2500 x 530 x 5000 mm
Weight : approx. 900 kg

Scope of Delivery

1 base frame
1 support frame
1 load frame with hydraulic cylinder
1 hydraulic unit
1 instruction manual

Order Details

022.08000 SE 080 Test Frame for Pillars